Heat-resistant aluminum titanate ceramic riser tube /stalk tube for aluminum wheeling making plant
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Aluminum titanate
has higher melting point(1860?±10?),lower thermal expansion coefficient and excellent heat-shock resistance .Besides,the aluminum titanate don’t infiltrate with the metal melt(especially the non-ferrous metals) and glass melt.Therefore aluminum titanate can be widely used in the conditions of high-temperature resistance?heat-shock resistance and corrision resistance.
Low-pressure die casting is a process in which molten metal is transported from a holding furnace via a riser tube into a mould. Riser stalk is the critical part of the process. During traditional production, steel riser tube can not satisfy the requirements of continuous production and high quality, so aluminium titanate becomes ideal material of stalk tube due to its low thermal expansion coefficient, good thermal shock resistance and no wetting by molten metal.
The aluminum titanate riser tube is the key part of the low pressure aluminum casting machine,the features are as following:
1,Excellent thermal shock resistance
2,No infiltration with the non-ferrous metal
3,Excellent wear resistance
4,Low thermal-expansion coefficient
5,The service life of the aluminum titanate riser tube can reach 60 days , can enhance the production efficiency and reduce the cost.
Characteristics of riser tubes
Tech Data ---Aluminum titanate ceramic
Item | Riser tube |
Al2O3% | 50-55 |
TiO2% | 40-45 |
Fe2O3% | =0.2 |
K2O+Na2O% | =0.02 |
Density (g/cm3) | >3.3 |
Heat conductivity (W/m.k) | 0.86-1.00 |
Flexural strength (Mpa) | 30-35 |
Porosity (%) | <8 |
Working temperature (?) | <1400 |
Item | Standard | Unit |
Density | 3.2 | g/cm3 |
Porosity | 3.8 | % |
Bending strength | 50 | MPa |
Thermal-expansion coefficient | 1.17 | 10-6/? |
Heat-shock resistance | Good |
Specification of normal riser tubes:
OD(mm) | ID(mm) | Length(mm) |
F78 | F58 | 850 |
F100 | F80 | 400 |
F120 | F100 | 600,800 |
F130 | F110 | 1063 |
F130 | F100 | 750 |
F120 | F70 | 1220 |
F120 | F80 | 950 |
F100 | F60 | 900 |
F114 | F68 | 1100 |
F100 | F60 | 970 |
F110 | F63.5 | 900 |
F90 | F61 | 850 |
F105 | F75 | 1050 |
F120 | F80 | 930 |
- Aluminum Silicate Ceramic Launder For Molten Aluminum Flow 1 Pieces / (Min. Order)
- Advanced Ceramic Aluminum Silicate Caster/casting Tip For Aluminum Sheet Casting 1 Pieces / (Min. Order)
- Anti-corrosion Alumina Ceramic Bend/elbow For Coal Powder Transportation System 1 Pieces / (Min. Order)
- Wear-resisting Ceramic Alumina Cyclone Cone For Conveying System 1 Pieces / (Min. Order)
- Wear-resistant alumina ceramic pipe/tube for conveying lining 1 Pieces / (Min. Order)
- Heat-resistant and anti-corrosion aluminum titanate ceramic sprue bush for aluminum casting 1 Pieces / (Min. Order)
- GPS Silicon nitride ceramic Degassing rotor and shaft for melting aluminum 1 Pieces / (Min. Order)
- Anti-erosion gas pressure sintered silicon nitride insulating ring for solar photovoltaic 1 Pieces / (Min. Order)
- Anti-erosion gas pressure sintered silicon nitride thermocouple protection tube/sheath for thermocouples measuring 1 Pieces / (Min. Order)
- Gas pressure sintering silicon nitride riser tube/stalk tube/lift tube for low pressure die casting in wheels-making plant 1 Pieces / (Min. Order)
- high purity gray silicon nitride ceramic powder as additive and coating 1 Pieces / (Min. Order)