Wear-resisting Ceramic Alumina Cyclone Cone For Conveying System

Product Detail

Dense medium preparation is the most efficient way of gravity concentration.The main equipment hydrocyclone which is widely applied characterized with small volume, no moving parts,large handling capacity,high separation efficiency. The requirements on abrasion protection of main parts of cyclone like guiding cylinder of feeding,cone and underflow is more and more higher. Meanwhile, the requirement on service life of equipment is more and more higher for reducing maintainance frequency and increasing profits, especially for the abrasion of cyclone, elbow, pipeline etc.

 

When cyclone is at work, the rotary motion of material generates great centrifugal force, the inwall of cyclone is worn at high speed. For dense material, the abrasion of inner is extremely worse under high impact by centrifugal force. One-piece alumina ceramic tube is used as wear resistant lining in cyclone for its high hardness, strength, abrasion resistance and economic practicality.  

 

Tech data:

Product          Technical Parameter	92	95
Al2O3%	=92	=95
Fe2O3%	=0.2	=0.15
Mohs' hardness	8	9
Water Absorption (%)	=0.02
Bulk Density(g/cm3)	=3.60	=3.65
Abrasion(%)	=0.02

Pipe linings of alumina ceramic cylinders have the following advantages:

 

Cold isostatic pressing makes long lifetime.

Maintenance-free operation makes no operation interruption and production losses.

Good corrosion resistance to strong sour and alkali

Smooth surface to achieve good flowaility and to avoid plugs.

 

Application:

Flyash pipework lined with alumina ceramic tubes

Pulverized coal pipework lined with alumina ceramic pipes